Specifications, 6specifications, Electrical – MoTeC GPS-L10 User Manual
Page 8: Connections, Data, Physical, Gps performance
6
Specifications
Specifications
Electrical
Power Supply Voltage 4.0 to 6.0 V
Power Supply Current 38 mA Typical
Connections
Mating Connector
Deutsch DTM06-4S
Pin Name
Description
1
Bat -
Connect to Battery Negative on the logging device
2
TX
Connect to RX pin on logging device
3
RX
Don't connect (this pin is only used for programming)
4
5V
Connect to 5 V sensor supply on the logging device
Data
Output Type
RS232
Output Levels
-5 V / 5 V (nominal)
Baud Rate GPS-L5
19200 (MoTeC default)
Baud Rate GPS-L10
38400 (MoTeC default)
NMEA Sentences
RMC, GGA (MoTeC default)
Physical
Antenna
Built into GPS unit
Size
48 mm x 41 mm x 14 mm (1.9" x 1.6 x 0.55")
Weight
106 g (3.8 oz)
Cable length
3 m (10 ft)
Operating Temp
-30 °C to +80 °C (-22 F to 176 F)
Mounting
Magnetic base
GPS Performance
Update Rate
5 Hz (GPS-L5), 10 Hz (GPS-L10)
Satellite Channels
66
Reacquisition Time
< 1 sec
Hot Start Time
2 seconds
Warm Start Time
33 seconds
Cold Start Time
35 seconds
Dynamics
4G