Lexibook SMBABY1 - Manual (Page 16)

16
ENGLISH
Using the Parent Unit
“Baby Monitor” transmission mode
Use the transmission mode switch located at the back of the Baby unit to select the desired
transmission mode.
• Noise activated (default mode): the transmission starts only when noise is detected in the
Baby’s room.
• Permanent transmission from the Baby unit to the Parent unit.
Note: This mode will use up the batteries more quickly.
Transmission channel selection
Use the channel selection switch on the back of the unit to select a transmission channel (1,
2 or ) for the Baby unit.
Switch the parent unit On/Off
Use the volume switch on the right side of the Parent unit to turn it on or turn it off. The LED
lights up when the unit is powered on. Adjust the volume of the baby monitor with the wheel.
Turn the “Baby Monitor” feature On/Off
Press the “Baby Monitor” On/Off button to switch on or switch off the “Baby Monitor” feature.
This function allows you to listen to the child’s room.
Transmission channel selection
Use the channel selection switch to select a transmission channel (1, 2 or ) for the parent
unit.
Important note: The channel selected for the Parent unit must be the same as the one chosen
for the Baby unit. If the channels are different, the Parent unit will not be able to receive the data
sent by the Baby unit.
Temperature display in Celsius/Fahrenheit
Use the « Temperature » button located on the front to toggle the temperature display
between Celsius and Fahrenheit.
LCD screen icons
1. The temperature and humidity display and the “comfort zone” icons show the condition in the
baby’s room ( : outside the comfort zone, : optimal conditions).
2. The “Sleep Guardian” icons indicate if the “Sleep guardian” function has been switched on and
which mode is selected. If the feature has been activated by the baby crying, these icons will
flash ( : Lightshow mode, : Sounds mode, : Music mode).
3. The “Night light” icon is displayed when the “Night light” feature has been switched on.
. If the Parent unit is out of range and does not receive any signal from the Baby unit, the LED
will flash continuously and the “out of range” icon is displayed on screen.
Note: This icon will also be displayed after the Parent unit is switched on until it finds the signal
from the Baby unit.
Comfort Zone Alarm
Use the alarm selector to turn on or off the “Comfort Zone Alarm”:
OFF position: the alarm is disabled.
ON position: when the alarm is switched on, it will ring if the conditions of the baby’s room are
outside of the Comfort Zone.
Note: The alarm keeps on ringing for 3 minutes or until the Alarm switch is moved to the “Off”
position.
Maintenance and warranty
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on your unit may be
cleaned with a dust cloth and cared for as other furniture. Use a soft, clean cloth moistened with plain, lukewarm water to clean
the exterior of the unit. Use caution when cleaning and wiping the plastic parts. Mild soap and a damp cloth may be used on
the front panel.
NOTE: Please keep this instruction manual, it contains important information. This product is covered by our 2-year warranty.
For any claim under the warranty or after sale service, please contact your distributor and present a valid proof of purchase. Our
warranty covers any manufacturing material and workmanship defect, with the exception of any deterioration arising from the
non-observance of the instruction manual or from any careless action implemented on this item (such as dismantling, exposition
to heat and humidity, etc.). It is recommended to keep the packaging for any further reference. In a bid to keep improving our
services, we could implement modification on the colours and the details of the product shown on the packaging.
Reference: SMBABY1
©2008 LEXIBOOK®
Designed and developed in Europe – Made in China
Lexibook UK Ltd,
Unit 10 Petersfield Industrial Estate,
Bedford Road, Petersfield,
Hampshire, GU2 QA, United Kingdom.
Helpline: 0808 100015, http://www.lexibook.com