DE-STA-CO 300IOC - Manual (Page 2)

®
350 IOC and Smaller
Repair Parts List
Advise clutch size and CAMCO serial number.
1 Housing
2 & 5 Thrust Head & Friction Cone
Advise bore size and keyway size.
3 Adjustment Nut
4 Thrust Head
6 & 7 Thrust Bearing Assembly
8 Pressure Ring
9 Grease Fitting
10 Conepoint Setscrew
11 Stop Pin
12 &13 Shut-Off Spool Assembly
14 Cap Screws
4.0 Lubrication
Clutches are grease packed at the factory and should
not require additional lubrication. If clutch is subject
to consistent slippage and heating, grease with (Mobil
47 or 77) grease through standard grease fitting (part
#9). Do not use air pressure gun.
NOTE: Item 12, 2 setscrews, are not used in CAMCO type
IOC applications.
FIGURE 1A