BatteryMINDer OBD-12, -24, -36 & -48 - Manual (Page 9)

Rev. H-041409 Page 9 ` P/N VDC OBD12-24-36-48-MNL
BatteryMINDer Models OBD12-24-36-48
1. LED (Light Emitting Diodes) Indicators (pgs. 11 - 13)
2. Push To Test Button (pg. 12)
3. Positive Lead w/Ring Terminal (pg. 10, 11)
4. Negative Lead w/Ring Terminal (pg. 10, 11)
5. Replaceable Fuse (10 Amps) (pg. 10) 6. Mounting Tabs (2) (pg. 10)
7. Auxiliary Charger Input Cord & Plug (pg. 9, 10)
8. Plug Cover (pg. 9, 10)
9. Velcro loop-lock adhesives (pg. 10)
Auxiliary charger connector
All OBD Model units are equipped with an auxiliary connector plug (charger input cord and plug) designed to
allow a battery charger/maintainer to easily be attached to each unit, providing the voltage, polarity and plug
type of the particular charger is the same*.
It must never be used for any other purpose as the polarity of the
connector may be different from the product you are plugging in. This could cause a short circuit or damage
the unit, voiding the guarantee and warranty.
Note: RED LED Fault Indicator will light if a device with incorrect
polarity or fault is plugged into the Auxiliary charger connector.
*Model OBD-12 is designed to be attached to one of VDC Electronics’ maintenance type chargers, such as
the BatteryKeeper model 12612 or BatteryMINDer Models 12248, 12112, 12117.
Model OBD-24 is also designed to be attached to a VDC Electronics’ maintenance type charger, namely the
BatteryMINDer Model 24041.
■