BatteryMINDer 12151 - Manual (Page 7)

Rev. A-072610 Page 7 P/N VDC 12151-MNL
BatteryMINDer ® Model 12151
The BatteryMINDer charges your battery (LED solid GREEN ) to full voltage
first before it automatically goes into the maintenance/desulfation mode.
Then the LED blinks GREEN during the desulfation - maintenance mode.
The battery is now charged.
3. The charger design incorporates reverse battery and short circuit
protection by measuring a small battery voltage of the proper polarity before
the charger turns the charge output on. For this reason, the battery voltage
must measure at least 8.5 Vdc before the charger will charge the battery.
CHARGER MAINTENANCE AND CARE
A minimum amount of care can keep your battery charger working properly
for years. Just as with any appliance or tool, keep your battery charger clean
and dry. Occasionally cleaning the case and cables with a dry or slightly
damp cloth will prolong the life of your charger.