BVA Hydraulics J10300 - Manual (Page 4)

SPecIFIcatIOnS
MaIntenance
Important: Use only good grade hydraulic jack oil. NEVER
use brake fluid, turbine oil, transmission fluid, motor oil or
glycerin. Improper fluid can cause premature failure of the jack
and the potential for sudden and immediate loss of load. We
recommend Mobil DTE 13M or equivalent.
2. Lay the jack on its side and drain the fluid into a suitable
container.
note: Dispose of hydraulic oil in accordance with local
regulations.
3. Fill with oil until just below the rim of the oil filler hole.
Reinstall the oil filler screw/plug.
4
Model Capacity
Base Size
(L x W)
Min. Height Max. Height Extension Screw Hydraulic Lift
J10125
12 Ton 5-1/4" x 5-1/8"
9-3/8" 18-1/2" 3-1/8" 6"
J10129 6" 10-3/4" 1-5/8" 3-1/8"
J10205
20 Ton 6-1/4" x 5-7/8"
9-1/2" 18-5/8" 3-1/8" 6"
J10209 6-1/2" 11-1/4" 1-5/8" 3-1/8"
J10300 30 Ton 8-1/8" x 6-7/8" 11" 18" N/A 7"
Storage
When not in use, store the jack with pump piston and ram
fully retracted and air supply disconnected.
cleaning
Periodically check the pump piston and ram for signs of rust or
corrosion. Clean as needed and wipe with an oily cloth.
Lubrication
1. A periodic coating of light lubricating oil to pivot points, axles
and hinges will help to prevent rust and assure that pump
assemblies move freely.
changing oil
For best performance and longest life, replace the complete
fluid supply at least once per year.
1. With saddle fully lowered and pump piston fully
depressed, remove the oil filler screw/plug.
adding oil
1. With saddle fully lowered and pump piston fully
depressed, set jack in its upright, level position.
Remove oil filler screw/plug.
2. Fill with oil until just below the rim of the oil filler
hole. Reinstall the oil filler screw/plug.
• The paint on this product contains lead, a
chemical known in the State of
California to cause cancer, birth defects and
other reproductive harm.
• Do not ingest paint chips and keep product
away from children.
• Wash hands after each use.
WARNING
!
Paint contains lead!
DO NOT sand or grind painted surface!
!