BVA Hydraulics P8701, P8701M - Manual (Page 2)

2
Pump
Handle
Release Valve
Knob
Reservoir
Vent Screw
Oil Outlet Port
[ 3/8” -18NPTF ]
Used with
Cylinder
Model Usable Oil
Capacity
(in 3 )
Oil
Capacity
(in 3 )
Pressure
Rating
(psi)
Oil Displacement
per Stoke
(in 3 )
Pump Size
(L) x (W) x (H)
Net
Weight
(lb)
1st
stage
2nd
stage
1st
stage
2nd
stage
Single
Acting
P8701
476 531 290 10,000 7.71 0.29 30 3/8” x 15 1/4” x 11 5/8”
90.4
Double
Acting
P8701M 90.8
SPECIFICATIONS
Carrying
Handle
Figure 2 - Model P8701M Components Figure 1 - Model P8701 Components
Drain Plug
Support
Frame
Pump Handle
Control
Valve
Lever
Reservoir
Vent Screw
Oil Outlet Ports
[ 3/8” -18NPTF ]
Carrying
Handle
Drain Plug
Support
Frame
4-way
Control valve
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall
have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and
safety information shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the
operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as
to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use. It is recommended that, prior to each use, an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement parts only. Any
pump that appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service immediately
until such time as repairs can be made. Owners and operators of this equipment shall be aware that the use and subsequent
repair of this equipment may require special training and knowledge.
PRODUCT DESCRIPTION
BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for performance and safety. These pumps have
a unique two-stage hydraulic circuit allows quick displacement of hydraulic fluid under no load conditions and easy pumping in
loaded conditions. These lever operated pumps supply compressed hydraulic fluid to compatible applications i.e. rams, presses,
spreaders, compactors and crimping machines, anywhere that 10,000 PSI of fluid pressure is needed. Special skill, knowledge
and training may be required for a specific task and the product may not be suitable for all the jobs described above. Unsuitable
applications would include applications that call for a device to move, level or support persons, animals, hazardous materials,
mobile homes/ dwellings in general, mirrors and/or plate glass, and/or to connect/secure hatches, components, etc. between
bulkheads. The user must ultimately make the decision regarding suitability of the product for any given task and assume the
responsibility of safety for himself/ herself and others in the work area.
Always check connections before using. Alteration of these products is strictly prohibited. Use only those adapters and
attachments provided and approved by the manufacturer.
WARNING: To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each
pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump.
!
!