Brickcom PZ-040 12x Series - Manual (Page 12)

8
3) Mount the metal plate on the ceiling and position the three screw
slots over the plastic anchors. Insert the three screws provided in
the product package into the holes and use a screwdriver to tighten
the screws clockwise until they are secure.
C. Loosen the screw on the rim of the metal plate but do not remove the
screw completely.
D. Push all cables and connectors through the cable hole into the ceiling,
and attach the PTZ camera to the metal plate.
E. Turn the PTZ camera counter clockwise until it is in a locked position.