Brickcom CB-500A User Manual
Page 60
- 53 -
3. PPPoE (Point-to-point over Ethernet): Use this mode if connecting to the Internet
through a DSL Line.
NOTE - To utilize this feature, it requires an account provided
by an Internet Service Provider. Enter the user name and password provided by the ISP.
Click Apply to apply settings or Cancel to cancel changes.
4. 3G(*) – Use this option if using a 3G SIM card to transmit video/audio surveillance
over a 3G network
NOTE - This function is only available for GOB models.
a. Enter the APN (Access Point Number), Dial Number, PIN Code, User
Name and Password provided by the ISP.
b. Click Apply to apply the settings. The message below will be
displayed if the 3G settings were successfully applied.
c. Before disconnected the wired connection with the network camera,
obtain the IP Address by opening EasyConfig. The 3G connection IP
Address will be displayed in the IP Address column.