Brickcom CB-500A - Manual (Page 48)

- 41 -
Protocol) controls the delivery of streaming media.
Click “Enable” to enable Multicast stream 1 or Multicast stream 2. The default value for multicast
address and port are 234.1.2.3 and 10000. Use different port number for different streams. It is
recommended to use the default values.
NOTE - Using the IP address of the Network Camera enables access to the video.
Example: rtsp://192.168.1.1/channel1
Click Apply to apply settings or Cancel to cancel changes.
Privacy Mask Control
The Cube camera is equipped with a privacy feature which allows users to mask the camera’s
live view. A black screen will be displayed in place of the live view window. This application is
particularly useful when the camera is being used for home surveillance. With the privacy
button, the user can have privacy while they are going about their daily life.
Privacy Mask Control – Enable the Privacy Mask control to remotely mask the camera’s live
view.
Hardware Privacy Mask Button – Click to enable the privacy mask button on the camera.
If this feature is not enabled, the user will not be able to use the privacy mask button.
Click Apply to apply settings or Cancel to cancel changes.