Brickcom OB-v2-series - Manual (Page 41)

38
E. If the camera supports the EasyLinkTM function, the following page will
be displayed. Otherwise, this page will not be shown. *If desired, click
to skip this setting.
EasyLinkTM is a unique Brickcom function which allows users to assign a
unique EasyLink
name to their network camera’s IP address. There is no
need to configure the router to open up ports or remember
hard-to-memorize IP addresses. Users can log onto
[uniqueEasyLink name].mybrickcom.com to view the camera’s web GUI and
live view.
a. Enter a unique EasyLink name whose length must be between 5-32
characters.
b. When finished, click the arrow button to continue.