Brickcom OB-v2-series - Manual (Page 20)

17
B. Wall Installation Using the Optional Bracket
a. Using the Bracket plate as a guide, drill three holes into the wall and
hammer the supplied plastic anchors into the three holes. Use a
screwdriver and the supplied screws to secure the plate to the wall.
b. Attach the Bracket Assembly Plate to the bottom of the camera using
two screws.
c. (1) Use the two supplied screws to secure the bracket to the side of
the camera. (2) Push back the spring on the mortise lock and hook
the camera and attached bracket onto the groove of the wall mount
bracket as shown in the diagram.