B&K Precision 1856D - Manual User Manual
Page 11
11
IN CASE OF 230 V AC, VOLTAGE SELECTOR (on rear panel) SHOULD BE
SELECTED TO 230 V POSITION AND THE FUSE SHOULD BE CHANGED
ACCORDING TO THE FUSE RATINGS IN THE SPECIFICATIONS.
2-3. Cooling and Ventilation
No special cooling and ventilation is required. However, the instrument should
be operated where the ambient temperature is maintained.
2-4. Position
This instrument is built as a bench-type instrument with rubber feet and tilt stand
in place. The stand-up angle can be adjusted by changing the angle of the
carrying handle.
2-5. Warming-Up
Allow at least 30 minutes for the unit to warm up so that it can stabilize.
3. OPERATION
3-1. Controls, Indicators and Connectors
19
18
15
16
10
12
9
2
3
1
4
5
6
14
8
20