B&K Precision 1737 - Manual - Manual (Page 9)

7
CURRENT CONTROL
7) Current Coarse Control. Coarse adjustment of current limit. Read value on the
red LED display.
8) Current Fine Control. Fine adjustment of current limit. Read value on the red LED
display.
POWER CONTROLS
9) Power ON-OFF Switch.
OUTPUT TERMINALS
10) “-” Terminal (Black). Negative polarity output terminal.
11) GND Terminal. Earth and chassis ground.
12) “+” Terminal (Red). Positive polarity output terminal.
3.2 Rear Panel
Figure 2 - Rear Panel
13) Power Cord
14) Fuse
15) RS-232 Interface Connector
15
14
13