B&K Precision 1673 - Manual - Manual (Page 7)

5
2 Introduction
Description
B&K Precision’s 1672 and 1673 triple output DC power supplies provide two variable
outputs (0 – 32V/ 0 – 3A [model 1672], 0-6A [model 1673]) and one fixed output (5V/3A).
The variable outputs can work independently, in series tracking, or parallel mode.
Conveniently adjust voltage and current with independent front panel knobs and bright
quad display. These power supplies are ideally suited for applications in electronic test,
production, and service, where multiple independent DC power supplies are required and
bench space is at a premium.
Features
 Three independent outputs
 Individual control of voltage and current controls for variable outputs
 CV (constant voltage)/CC (constant current) mode operation
 Separate 3-digit displays for voltage and current for variable outputs
 LED indication for CV/CC mode
 Overload indication LED for fixed output
 Series tracking and parallel mode operation
 Power On/Off switch on front panel
 Input voltage selection on rear side (115 Vac/ 230 Vac)
3 Installation
3.1 Initial Inspection
This unit is tested prior to shipment. It is therefore ready for immediate use upon receipt.
The initial physical inspections should be made to ensure that no damage has been
sustained during shipment.
Inspect the packing box on receipt for any external damage. If any external damage is
evident, remove the instrument and visually inspect its case and parts for any damage. If
damage to the instrument is evident, a description of the damage should be noted on the
carrier’s receipt and signed by the driver or carrier agent. Save all shipping packaging for
inspection. Forward a report of any damage to the agent through which the unit is
procured.