Avision IS1000 (BF-1008S) - Manual (Page 23)

User’s Manual
3-3
5. When the scanning is done, the Function Display will be
flashing the next document number. Open the document
cover to remove the current page and place the next page
on the glass.
6. Press the green Scan button to begin scanning. (If the 4-
in-1 option is selected, you will repeat the current and
previous steps more times.)
7. In a few seconds, the scan is done and will be merged into
one single image as illustrated below:
2-in-1
4-in-1
Note：
The delay time is 15 seconds. If you have not pressed the
Scan button in 15 seconds during step 6 above, the scanner
will automatically finish the current scan job, and save the
scanned document into a file.