Avision IS1000 (BF-1008S) User Manual

Page 100

6-4

6.3 Scanning From One Touch of the Buttons

1. Place your original face down on the document glass and

make sure the top of your original near the document

alignment mark.

2. Check the number on the LED screen to ensure if you are

selecting the proper scan settings and destination

application. (For example, if you want to scan with button

#4, which open Microsoft Paint and display the scanned

image in the main window of Microsoft Paint, the LED

screen should show 4).

3. Press the Scan button on scanner.

4. After the scanning is finished, the Microsoft Paint software

will be launched and the scanned image appears in the

main window of Microsoft Paint as below.

Note:

1. For details information on how to use the Button Manager,

please refer to the user’s manual in the supplied CD.

2. You may also using Button Manager on your desktop by

starting Button Manager from All Programs or double

clicking the Avision Scanner Utility from the Control Panel.