Avision IS25 manual - Manual (Page 126)

9-4
9.3 The System LED light pattern
In the “SD/Flash” mode, the System LED light
patterns represent the following status:
Light Description
Steadily on
in green
color
The scanner is ready for use.
Blinks in red
color
continuously
„ Initializing system and memory
card. Please wait until the
initialization process is complete
before using the scanner.
„ Busy scanning and storing image
files. Please wait until the process is
complete before scanning another
original.
„ Sensor cleaning in progress. Please
wait until the process is complete
before performing any operations.
2 Blinks in
red color
Paper jam. Remove the paper gently
from the feeding slot.
3 Blinks in
red color
„ No SD card or USB flash drive in
“Scan to SD/Flash” mode.
„ Wrong SD card.
„ No USB cable in “Scan to PC” mode.
4 Blinks in
red color
Calibration failed. Error indication only.
6 Blinks in
red color
Battery power is too low to perform a
scan.
No light The scanner is powered off.