Avision @V2100 - Manual (Page 31)

Setting up Your Machine 2-10
Note:
1.
*NTP Server: Stands for Network Time Protocol. To set the correct clock
on the @V2100, it is recommended to fill in the IP address of your NTP
server. For your information, following IP addresses of the NTP servers
can be accessed. Simply choose one of them and fill the IP address in the
NTP server field on the Network screen.
Country Host Name IP Address
Australia ntp.cs.mu.OZ.AU 128.250.36.2
Canada clock.uregina.ca 142.3.100.2
Swiss swisstime.ethz.ch 129.132.2.21
Germany ntp0.fau.de 131.188.34.75
France canon.inria.fr 192.93.2.20
Hong Kong clock.cuhk.edu.hk 137.189.6.18
Japan clock.nc.fukuoka-u.ac.jp 133.100.9.2
USA ntp.alaska.edu 199.165.76.11
2. To set the clock for the @V2100, in addition to entering the IP address of the
NTP server, you are requested to choose the appropriate time zone in
your area in the “Date/Time” field. To choose the appropriate time
zone, please press the “Menu” and then “General” buttons on the
Control Panel, then select your time zone in “Time Zone” field. Once
you are done, the @V2100 is able to reflect the accurate local date and
time each time the machine is powered on.