Avision FB6080E (DT-0602S) - Manual (Page 16)

3-2
3.2 VERIFYING YOUR SCANNER INSTALLATION
To verify if your scanner installation is correct, Avision
provides you a useful test program called Avision Capture
Tool. With this tool, you can perform simple scans and
view the captured images. In addition, it helps you
complete your scan at a rated speed.
The following procedure describes how to verify your
scanner installation. If the installation is not correct, please
review the preceding section to check if the cable
connection and scanner driver have been successfully
installed.
Before you begin, be sure the scanner is on.
1. Select Start>Programs>Avision AVxxx Scanner>Avision
Capture Tool.
The Select Scanner Model dialog box will be displayed.
2. Select your driver type and scanner model and click OK.
The following Avision Capture Tool dialog box will be
displayed.