Avision AVA3 400 - Manual (Page 11)

Scanner Installation
2-2
2.2 UNLOCKING YOUR SCANNER
To protect the scanning unit from damage during
transportation, a lock switch is designed at the back of the
scanner to keep the scanning unit from moving. To unlock
the scanner, move the lock switch up as shown in Fig. 2-1.
Figure 2-1 Unlocking the Scanner
Note: When you need to transport the scanner, be sure to
proceed the following steps and move the lock switch to the
“lock position” otherwise unexpected damage should cause
the scanner malfunction and void the warranty.
1. Turn on the scanner.
2. The POWER LED should light up and the READY LED
is flashing to perform the initial self-test.
3. If no error occurs, the READY LED should be steadily
on.
4. Turn off the scanner now.
5. Press the lock switch down to the “Lock position”.
6. The scanner is now ready to transport.