Avision AV3200U+ (DF-0902H) - Manual (Page 98)

User’s Manual
Question: When I power on the scanner, it makes
noises and will not stand ready.
Answer: There are two possibilities:
a) You forgot to remove the shipping switch
from the scanner. Please remove the
shipping retainer first.
b) You did not place the scanner on a flat
desktop surface. This may cause the
scanner to function improperly.
Question: When I power on the scanner, the lamp
does not light.
Answer: The possibilities are as follows:
a) The lamp is out of order. In that case,
contact your authorized local dealer to
change the lamp. The life time of the lamp
is about 5000 hours.
b)
Check whether the power LED on ADF
cover steadily lights or not.
If it flashes, the power adapter malfunctions
or the main board is short-circuited.
Contact your authorized local dealer to
replace the power adapter or main board.
7-3