Avision AV3200U+ (DF-0902H) - Manual (Page 19)

3.2 ADF Scanning
Multiple documents can be fed automatically using the ADF.
Refer to Figure 3-2.
1. To prevent occasional paper jam when automatically
feeding multiple documents, fan the paper before loading.
2. Lift the balance wire.
3. Place the documents onto the ADF paper chute in either
paper side (face-down, face-up), with the leading edge in
the auto feeder entrance.
Let the balance wire rest on the top of the documents.
4. Adjust the left and right guides so that they are snug
against the sides of the documents.
document
balance wire
guide
Figure 3-2 Load Multiple Document
3-2