Driver setup – Autel Wireless Diagnostic Interface User Manual
Page 9
8
Driver Setup
In order for the Bluetooth Diagnostic Interface device to operate correctly with
the diagnostic applications on the PC, you will need to first install the device
’s
driver onto the PC that controls the device.
The program package requires Windows XP, Windows Vista (32 or 64 bit), or
Windows 7 (32 or 64 bit).
IMPORTANT: Do not plug the interface device onto the PC until you have
installed the driver program.
The following steps may vary depending on the operating system or
components that are installed on your computer, but in general this is the
standard installation process.
1
Insert the CD that came with the MaxiSys tool kit into the CD/DVD slot of
the PC. The driver installation wizard will load momentarily. Follow the
Setup Wizard instructions to complete the whole installation process.