Autel Wireless Diagnostic Interface - Manual (Page 11)

10
8 Select
“Install the software automatically (Recommended)”, and click
on
“Next”. After the progress bar finishes, click on “Finish”. Users have
finished installing at this point and can run the software working with the
interface device.
Firmware Update
Autel periodically releases updates to the device
’s drivers. Updates are
necessary to solve specific problems and to ensure the VCI device is working
properly with the OEM software. If you are experiencing any problems during
use, always make sure that you have the latest device software and drivers.
Update Online
This function allows you to update the driver software for the device through
the PC. Make sure the PC is connected to the Internet before using this
function.