Autel Maxivideo MV208 - Manual (Page 20)

18
 Always handle the tool with care. It is not shock-resistant.
 Do not disassemble the tool beyond
what is shown in the
manual. Doing so will void your warranty.
4.5 On Screen Navigation
1) Splash Screen
When the tool is powered on, the first screen displayed is
referred to as the splash screen. (Fig. 13) This screen tells you
the tool is booting up. Once the tool is fully powered up, the
screen will automatically switch to the live screen.
Fig. 13
2) Live Screen
The live screen is where you will do most of your work. A live
image of what the imager head sees is displayed on the screen.
You can zoom, adjust screen backlighting, rotate images and
videos, view and capture photos and videos from this screen.
3) Switching from Still Image Capture to Video Capture
By default the tool will turn to still image capture when
powered on. Press 258B Video/Camera button to switch
between still image capture and video capture as you needed.
4) Adjusting screen backlighting
Pressing RIGHT and LEFT arrow buttons on the key pad (in
the still camera mode) will increase or decrease the screen