Autel Maxivideo MV208 - Manual (Page 11)

9
3. Installation and Connection
3.1 Battery Removal and Installation
Note: If the power indicator light is blinking continuously, this
reminds you to replace batteries in time as instructed.
Fig. 5
1) Turn the display unit handheld upside down to expose the battery
compartment cap and screw. (Fig. 5)
2) Use a screwdriver to remove screw and battery compartment cap.
3) Battery removal and installation.
Fig. 6
√ To remove the batteries, hold handheld display unit to remove
battery compartment and then remove batteries.(Fig.6)