Anemostat HCR - Manual (Page 4)

Slip-On Battens
For ceiling arrangements with inside corners, slip-on battens should be used and require custom field cutting after the
entire ceiling assembly is installed. This method provides the best appearance, while allowing for installed dimensional
tolerance. The Slip-On Batten Is shipped in lengths, requiring field cutting. Slip-on battens are provided with outside or
inside notches as shown:
4
A M A M E S T E K C O M E S T E K C O M P A N Y P A N Y
® ® 1220 Watson Center Road • Carson, CA 90745
Tel: (310) 835-7500 • Fax: (310) 835-0448
CLOSED CELL
GASKET
1/4 TURN
FASTENER
SLIP-ON BATTEN DETAIL
1/2
NOMINAL + 15/16
NOMINAL - 1/16
THIS SURFACE
EXPOSED
OUTSIDE
NOTCHES
THIS SURFACE
EXPOSED
INSIDE
NOTCHES
OUTSIDE
NOTCHES
90° CUTS
TYPICAL ARRANGEMENT REQUIRING SLIP-ON BATTENS
90° CUTS
OUTSIDE
NOTCH
OUTSIDE
NOTCH
90° CUTS
OUTSIDE
NOTCH
INSIDE NOTCH
90° CUTS