Anemostat Pro Jet - Manual (Page 4)

Free Flo / Pro Jet Installation Instructions
B. Ceiling Supported
• Installed prior to drywall installation
4
1220 Watson Center Road • Carson, CA 90745
Tel: (310) 835-7500 • Fax: (310) 835-0448
TAPE/JOINT COMPOUND
FOR FEATHERING FLUSH
TO FINISHED CEILING
DRYWALL
MOUNTING TAB
FOR 5/8" THICK
DRYWALL
FRAME
SERRATED DIFFUSER
OUTER FRAME FACE TO
PROVIDE BETTER ADHESIVE
SURFACE FOR JOINT COMPOUND
Models FFBF / PJBF Installation Detail
Outer Frame Detail
Outer Frame Detail
TAPE/JOINT COMPOUND
FOR FEATHERING FLUSH
TO FINISHED CEILING
DRYWALL
REVERSIBLE
MOUNTING TAB
FOR 5/8" OR 7/8"
THICK DRYWALL
FRAME
SERRATED DIFFUSER
OUTER FRAME FACE TO
PROVIDE BETTER ADHESIVE
SURFACE FOR JOINT COMPOUND
Models FFCM / PJCM Installation Detail
Diffuser Face Preparation Notes
• Diffuser face comes serrated for better adhesion of joint compound.
• Thoroughly remove any oil, dust, dirt, or residue from the entire diffuser face using a solvent or
degreaser.
• For increased adhesion, apply a bonding agent along the entire diffuser face. Be sure to allow
sufficient drying time before applying joint compound.
• Embed mesh or paper tape as standard practice across joints to prevent cracking.