Kit installation – American Expedition Vehicles TJ Highline Body Kit User Manual
Page 6
![background image](/manuals/317560/6/background.png)
Page 6 of 13
COMPLETED ABS TRAY
KIT INSTALLATION
A. INSTALL FENDERS
1. It is helpful to have two people install the fenders; take your time it should fit together
easily.
2. Once in place you can install, but don’t tighten, the bolts that attach the fender to the cowl
and the fender to the grille.
3. Snug the bolts down enough that the fender can still be moved but is not free so that the
kit can be adjusted later. For now, roughly align the top of the fender with the bodyline in
the cowl.
4. Install the latch on and the rubber hood to fender bumpers located on the top, front of the
fender.
5. Repeat for the opposite side.
B. INSTALL HOOD
1. Using the T40 bolts snug the bolts from the hood to the cowl. Shim as necessary for
height. Center the hood.
2. Install the latches on either side.
- JK WINCH MOUNT (10 pages)
- JK WINCH MOUNT CALL OF DUTY (5 pages)
- JK snorkel Kit (9 pages)
- Fuel caddy (7 pages)
- JK Roof Rack (11 pages)
- Rear Vision System (10 pages)
- JK Rear Bumper/Tire Carrier (19 pages)
- JK Front Bumper Skid Plate (4 pages)
- JK Heat Reduction Hood (4 pages)
- Jk WASHER Nozzle Kit (1 page)
- JK Tubeless Front Bumper (10 pages)
- JK Differential Cover (4 pages)
- JK Replacement Tow Loops (5 pages)
- JK Hi-Lift/Pull-Pal Mount (6 pages)
- JK Pump Kit, Rear Bumper Water Tank (4 pages)
- JK Slider - Rear Differential Skid Plate (2 pages)
- Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit (20 pages)
- JK Builders Rear Corner Guards (10 pages)
- Full Rail Kit for JK Roof Rack (4 pages)
- JK Cargo Liner (1 page)
- JK CORDURA Rear Seat Covers (4 pages)
- JK Jack Base (1 page)
- JK High Steer Kit (9 pages)
- JK Rear Track Bar Kit (12 pages)
- JK Geometry Correction Front Control Arm Drop Brackets (5 pages)
- ProCal Module User Guide (10 pages)
- ProCal Module Quick Reference Guide (2 pages)
- JK 2.0 Spacer Suspension (13 pages)
- JK DualSport XT Suspension 2.5 (11 pages)
- JK DualSport SC Suspension 3.5/4.5 (17 pages)
- AEV-Nth JK Suspension Systems (14 pages)
- JK Hemi Builder Kit - Installation Guide for 07-11 JK Wrangler (36 pages)
- JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler (37 pages)
- JK Pintler Beadlock Wheels (3 pages)
- 4.0L Universal Oilpan Skid Plate (3 pages)
- Tummy Tucker – TJ Wrangler NON-Rubicon (11 pages)
- Tummy Tucker – TJ Rubicon models (13 pages)
- Brute Double Cab Tonneau Cover (6 pages)
- Preparation of the Jeep body tub (15 pages)
- Brute Frame (20 pages)
- Cab Closeout (6 pages)
- Brute Bed (7 pages)
- Brute Hardtop (8 pages)