American Expedition Vehicles Brute Frame - Manual (Page 4)

Page 4 of 20
4. Remove the brake and fuel line bundle. Rubicon Locker Pump hose and any vapor lines on
your particular year Wrangler will be lengthened with rubber hose available at any auto parts
store. Be sure to get hose that is not affected by gasoline fumes for any vapor lines.
5. Clean the frame. A good job will require the area to be stretched to be free of any dirt or
rust.
6. Remove the rear driveshaft. This will need to be re-tubed for the new length. We
recommend waiting till you have your vehicle sitting at ride height before taking a
measurement and sending the shaft to your local driveshaft shop.
7. Remove the body mounts located directly in front of the rear wheels. Take your time cutting,
you will be reusing these later.