V. engine bay preparations – American Expedition Vehicles JK HEMI Builder Kit - Installation Guide for 12+ JK Wrangler User Manual
Page 23
21
V. ENGINE BAY PREparations
1. Remove the factory coolant bottle.
2. Remove fan assembly
3. Remove AC lines. Save the pressure switch and O-Ring for later use.
4. Remove the cooling module.
5. Strip the cooling module. Everything will be reused except the radiator.
6. Install the supplied power steering cooler. Use the AEV supplied spring clamps NOT the hose clamps
provided with the cooler (fig 31).
Figure 31
7. Install the AC condenser/transmission oil cooler/steering cooler assembly onto the supplied AEV
Hemi radiator using the factory hardware and supplied p-clips, and petcock (fig 32).
Figure 32
See also other documents in the category American Expedition Vehicles For the car:
- JK WINCH MOUNT (10 pages)
- JK WINCH MOUNT CALL OF DUTY (5 pages)
- JK snorkel Kit (9 pages)
- Fuel caddy (7 pages)
- JK Roof Rack (11 pages)
- Rear Vision System (10 pages)
- JK Rear Bumper/Tire Carrier (19 pages)
- JK Front Bumper Skid Plate (4 pages)
- JK Heat Reduction Hood (4 pages)
- Jk WASHER Nozzle Kit (1 page)
- JK Tubeless Front Bumper (10 pages)
- JK Differential Cover (4 pages)
- JK Replacement Tow Loops (5 pages)
- JK Hi-Lift/Pull-Pal Mount (6 pages)
- JK Pump Kit, Rear Bumper Water Tank (4 pages)
- JK Slider - Rear Differential Skid Plate (2 pages)
- Moab/Call of Duty Rear Bumper Water Tanks with Pump Kit (20 pages)
- JK Builders Rear Corner Guards (10 pages)
- Full Rail Kit for JK Roof Rack (4 pages)
- JK Cargo Liner (1 page)
- JK CORDURA Rear Seat Covers (4 pages)
- JK Jack Base (1 page)
- JK High Steer Kit (9 pages)
- JK Rear Track Bar Kit (12 pages)
- JK Geometry Correction Front Control Arm Drop Brackets (5 pages)
- ProCal Module User Guide (10 pages)
- ProCal Module Quick Reference Guide (2 pages)
- JK 2.0 Spacer Suspension (13 pages)
- JK DualSport XT Suspension 2.5 (11 pages)
- JK DualSport SC Suspension 3.5/4.5 (17 pages)
- AEV-Nth JK Suspension Systems (14 pages)
- JK Hemi Builder Kit - Installation Guide for 07-11 JK Wrangler (36 pages)
- JK Pintler Beadlock Wheels (3 pages)
- 4.0L Universal Oilpan Skid Plate (3 pages)
- Tummy Tucker – TJ Wrangler NON-Rubicon (11 pages)
- Tummy Tucker – TJ Rubicon models (13 pages)
- Brute Double Cab Tonneau Cover (6 pages)
- Preparation of the Jeep body tub (15 pages)
- Brute Frame (20 pages)
- Cab Closeout (6 pages)
- Brute Bed (7 pages)
- Brute Hardtop (8 pages)
- TJ Highline Body Kit (13 pages)