American Expedition Vehicles ProCal Module User Guide - Manual (Page 2)

2/5/2009 Page 2 of 10 AEV30200AA
PLEASE READ BEFORE YOU START
IN ORDER TO ENSURE PROPER FUNCTION, WE RECOMMEND READING THESE INSTRUCTIONS
THOROUGHLY BEFORE BEGINNING ANY WORK.
Included Parts QTY
ProCal Module 1
Quick Reference Guide 1
Required Tools
Fine pointed instrument for toggling switches
FEATURES OF THE MODULE
The ProCal Module allows the user to reprogram several factory parameters including:
• Tire size
• Gear Ratio
• One Touch Lane Change
• Daytime Running Lamps
• Low Tire Pressure Indicator
• Smart Bar Indicator Disable (after Smart Bar removal)
• Clear Diagnostic Trouble Codes
While the module is plugged into the OBD port, the ProCal Module can also:
• Set a Temporary Extended Idle
• Provide a Dead Center Steering Wheel Indication
• Clear Diagnostic Trouble Codes (DTCs) / Turn of the Check Engine Lamp
For AEV HEMI Builders Kit customers, The ProCal Module will:
• Program the Vehicle’s VIN into the new PCM Controller
• Program the Pedal Calibration and Tolerance
The ProCal Module is only designed to be plugged into the vehicle during programming or activation of run-
time features. Between uses AEV recommends storing the unit in the glove box or console. The included
Quick Reference Guide is intended to fit in your Owners Manual folder. It is important to cycle the key OFF
after any successful programming before starting/running the vehicle.
The module will lock to a vehicle’s VIN number and may not be used on another vehicle until the “RESTORE”
function is used on the original vehicle. The “RESTORE” function will reset a vehicle’s default settings to
stock and unlock the module for use in another vehicle.