American Expedition Vehicles 3.5— 4.5 Dualsport suspension - Manual (Page 4)

2
REAR SUSPENSION
1.
A. Raise Jeep and support the frame using jack stands or a hoist, such that the rear axle can be lowered
enough to remove the springs. Support the axle by placing floor jack under the center of the axle.
Remove the wheels.
B. Loosen but DO NOT remove all 8 control arm bolts.
C. Remove the track bar. (NOTE: Right hand drive vehicles will reuse the factory track bar)
A.
A.
B. B.
A.
C.