Alpha Technologies Continuity Battery Pack - Manual (Page 9)

0320004‐J0 Rev A Page 5
Relative humidity
(non condensation)
30%~90%
3.2. Selecting an Installation Position
The battery cable is provided with an 8 inch cable. Plan to install the battery pack within 3 to 4 inches from the UPS
or another battery pack.
It is necessary to select a proper environment to install the unit, in order to minimize the possibility of damage to the
battery pack and extend the life of the batteries. Please follow the instructions below:
1. Keep at least 20cm (8 inches) clearance from the rear panel of the battery pack from the wall or other
obstructions.
2. Do not block the air-flow to the ventilation openings of the unit.
3. Please ensure the installation site environmental conditions are in accordance with the battery pack working
specifications to avoid overheat and excessive moisture.
4. Do not place the battery pack in a dusty or corrosive environment or near any flammable objects.
5. This battery pack is not designed for outdoor use.
0°C (32°F) 40°C (104°F)