Aeromotive 17157 - COBRA JET BACK HALF FUEL SYSTEM - Manual (Page 5)

Figure 1-7
1-15. Once you have both bulk heads installed, assemble a hose with a 45-degree fitting on one end and a straight on the
other. This line will connect to the outlet of the fuel filter (45-degree hose end) and one of the bulk heads you just
installed.
1-16. Finish up the last line by assembling a hose with a straight hose end on one side and a 90-degree on the other.
This hose will make the connection from the return bulk head in the engine bay to the return bulk head in the trunk.
1-17. Now use the cushioned hose clamps to attach the lines to the body of the vehicle. Note: Be sure to route all fuel
lines clear of any moving suspension or drivetrain components and any exhaust components! Protect fuel
lines from abrasion and road obstructions or debris.
1-18. For pump wiring, use Aeromotive part # 16301.