Aeromotive 17157 - COBRA JET BACK HALF FUEL SYSTEM - Manual (Page 4)

Figure 1-5
1-13. Once the filter has been mounted, assemble a hose with a 90-degree fitting on one end and a straight on the other.
This line will finish the connection from the feed bulk head to the filter, figure 1-6. NOTE: Make sure you connect to
the pump outlet and not the return.
Figure 1-6
1-14. In the engine bay find a suitable place for the two AN-08 bulk heads. Typical place for these are behind the
passenger side strut tower, figure 1-7.