Aeromotive 17241 - BB CHEVY BELT DRIVE KIT - Manual (Page 2)

The following steps are typical of most installations:
1. Once the engine has been allowed to cool, relieve the fuel system pressure and disconnect the negative battery cable.
2. Raise the vehicle and support it with jack stands.
3. Attach the drive mandrel to the front face of the harmonic balancer with 3 of the 3/8-24 x 1 socket head cap screws.
4. Place one of the 1/8” square keys in the keyway on the mandrel.
5. Slide the 14-tooth pulley on to the mandrel
6. Thread the two 10-32 x 3/16” setscrews into the 14-tooth pulley; leave the assembly loose until final alignment can be
determined.
7. Thread each of the 7/16-14 x 1 ½” studs into each of the two spacers