ABUS TVCC74011-TVCC74021 - Manual (Page 26)

26
8.2 Mounting of the video cable
To connect the video signal of the camera with a monitor or recorder, use a coaxial cable of the
type RG59 with BNC-Connector (male) at the “VIDEO-OUT” connector.
The cable length up to the next device should not rise 100 meters.
8.3 Camera mounting
1. Please loose the fixing screws at the
camera cover using the supplied
hexagon wrench. Please remove the
camera cover.
2. Please use the mounting plate inside the
base plate as drill template.