ABUS TVCC51000 - Manual (Page 34)

34
COMMUNICATION
CAMERA ID
001
BAUD RATE 9600
PARITY NONE
DEFAULT
RETURN>
Function Description
CAMERA ID Setting for the RS-485 camera ID (ID 0 is reserved for the control
unit)
BAUD RATE Setting for the baud rate of the RS-485 communication interface.
PARITY Setting for the parity of the communication interface.
DEFAULT Restores all values in the sub-menu to the factory settings
RETURN Back to main menu
Function Description
BLOCK DISP ON: When the video image content changes, the corresponding
points are marked with square blocks.
OFF: Block display is deactivated
DETECT SENSE Sensitivity of the image change detection A higher value
increases the sensitivity
DURATION Set delay time for the zoom factor (5, 10, 15, 20, 30 seconds, 1, 2,
3,4 or 5 minutes)
ALARM OUT ON: Switching output is activated for successful motion detection.
OFF: Switching output is not activated for successful motion
detection.
ZOOM RATIO Zoom factor which is set by the camera automatically for
successful motion detection.
DEFAULT Restores all values in the sub-menu to the factory settings
RETURN Back to main menu