ABUS TVAC25000 User Manual
Page 20
17
English
5.2 Usage with non PoE compliant devices
1. Take the injector into operation, the LED will shine red.
2. Now connect the injector with the PoE Splitter (TVAC25010), please use therefore a network cable of
the category 5e (e.g. TVAC40800 – TVAC40850).
3. Now connect the splitter with the LAN port and the power plug of the camera, the LED of the Splitter
will shine green.
4. As soon as the injector recognizes the splitter, the LED will shine green.
6. Maintenance and cleaning
6.1 Maintenance
Regularly check the product's physical state, e.g. check for damage of the housing.
If you suspect that safe operation cannot be guaranteed anymore, disconnect the product and ensure
that it cannot be used by mistake.
You can assume that safe operation is not possible anymore when
•
the device shows visible damage,
•
the device does not function anymore
Please note:
The product is maintenance free for you. Inside the product are no parts that can be
checked or repaired, so do not ever open it.
Warning:
Before installation please make sure that the connected device needs a power supply of
12 VDC.
PoE Injector PoE
Splitter