ABUS TV8682 User Manual

Page 17

5.3. Audio signal input

This input is for connecting an audio signal source to the HF modulator. The input of the modulator processes signals between 50Hz-50KHz

and 0.5 Vp-p to 1.0 Vp-p.

5.4. HF signal output

This output is for connecting the modulated HF video signal of the modulator to the antenna input of your TV.

Alternatively, you can feed in additional HF signals using a 2-way or 3-way switch. For this purpose please note the connection examples.

6. Putting into operation

Follow the steps below to put the device into operation:

Step 1:

Connect the signal of the video/audio source to the inputs of the HF modulator.

Step 2:

Connect the HF output (F connector) to your TV.

Step 3:

Connect the adapter plug to the voltage input of the HF modulator and plug in the power unit to a mains socket.

Step 4:

Use the channel selector button to find a free (available) channel on your TV. The selected channel should leave at least one

channel free between a regular TV broadcaster and the HF signal.