ABUS TVAC10011 Operating instructions - Manual (Page 29)

29
English
8.7 Finally, connect the power supply unit provided to the monitor and the 230 V AC power supply.
9. Selecting the input signal
To select the input signal, press the source button. The selected input will be displayed on the upper right
of the screen. Press the source button repeatedly until you get to the input you require.
To confirm the selected output, please then press the + or – button.
You have the choice of AV1, AV2, HDMI and VGA.
10. On-screen menu
To call up the on-screen display, please press the “Menu” button.
To adjust the settings, you have the following screen menus at your disposal.
Image Settings for the display
OSD Settings for displaying the menu
Function Advanced settings for displaying the menu
Geometry Screen settings for VGA mode
Audio
Settings for audio playback
Please note that the menu structure depends on the input signal.