ABUS TVAC10011 Operating instructions - Manual (Page 27)

27
English
6. Mounting
6.1 Power supply
Before starting installation, ensure that the power supply voltage and the rated voltage on the power
supply unit are identical.
6.2 Ventilation
Please provide sufficient ventilation. The cooling openings may not be covered for sufficient ventilation.
6.3 Wall Mount
For mounting the monitor at a wall please use a VESA compatible wall mount. At the backside of the
monitor there are squarely arranged assembly holes (Middle distance 75 mm). These are compatible with
the ABUS TVAC10500 wall mount.
Please also pay attention to the installation manual of the wall mount.
During the mounting of the TFT monitor it must be separated from the mains voltage.
7. Button description
Button Description
SOURCE
Select one of the different input signals:
 HDMI (digital signal input)
 VGA (PC or DVR signal input)
 AV1 or AV2 (composite signal inputs)
 Select a submenu or confirm a selected value
MENU
 Show the OSD (on-screen display)
 Exit a menu item and the menu
+
 Navigate between menu items
 Increase the value in the OSD
 Increase the volume during operation
-
 Navigate between menu items
 Reduce the value in the OSD
 Decrease the volume during operation
POWER Switch monitor on/off