Settings – ABUS TVAC80010B User Manual

Page 15

English

8. Settings

Once the time-lapse setting has been made, the live picture appears after exiting the menu and the following
message with your setting values.

For the motion detection settings, the following screen appears after the settings have been made.

To save the battery, the screen switches off after 10 seconds and starts with the recording.

Please note:
During motion-triggered recording, you cannot open the menu!
After

pressing a button, the “PIR recording (Picture / Video)” message appears in your display.

Wait until the recording has finished (max. 30 seconds) before opening the menu.

Please note:
Motion-triggered recording is extremely sensitive to motion. Position the camera so that no
unnecessary movement is detected.

Please note:
An audio recording is only made when motion detection is in the AVI format (30 seconds
recording duration, the LED must not light up red).

TimeLapse Mode Enable

TimeLapse Interval: 1,5 sec
AVI Frame Rate: 30 FPS
Video Resolution: 1280 x 720
Band Filter: 60 Hz

PIR-Video Mode Enable

Motion Record Live: 30 sec
Video Resolution: 1280 x 720
Band Filter: 60 Hz