Installing the camera – ABUS TVAC80010B User Manual

Page 10

Text mode
Original mode

English

6. Installing the camera

Use a screwdriver to open the
battery compartment.

Insert a micro SD card (max. 32
GB, not included). Press the right
switch to select between time-
lapse and motion detection
recording (please see device
description, no. 6).

Insert four 1.5 V AA batteries.
Make sure the polarity is correct.

Close up the battery compartment
again using the screwdriver.

Put the hinge sleeve on the hinge
screw.

Now screw both parts together
with the fastening nut.

Do this by turning the cap
clockwise.

To attach the camera to a wall or
ceiling, first use the mount as a
drill template. Drill the holes and
use the wall plugs and screws
supplied to attach the mount.

Then screw the mount onto the
fixing plate.