ABUS TVCC75200 - Manual (Page 69)

69
12. DOME SET – [NEXT PAGE] – [INITIALIZATION]
To clear all stored settings for tour, preset, sector, privacy or pattern, move joystick
rightwards when the cursor is on [INITIALIZATION].
To clear memorized data, move joystick rightwards when cursor is on concerning item.
Press FOCUS NEAR button when the cursor is at YES to clear memorized data. Each item flickers
for about 5~10 seconds such as tour, preset and so on. After this process, the menu returns to the
previous page.
 [PRESET CLEAR], [SECTOR CLEAR], [PRIVACY CLEAR], [PATTERN CLEAR] has the
effect of [TOUR CLEAR] too, because each tour consists is a combination of presets, sector.
 To clear all data and to return to factory default, move joystick rightwards when cursor
is at [LOAD FACTORY SETTINGS] to enter the above page.
 Move joystick to the right or left direction in order to select YES, press
FOCUS NEAR button.
 “NOW EEPROM CHECKING” and “ALL DATA INITIALIZING” is displayed about
5~7 seconds and the menu returns to the previous page automatically.
13. DOME SET – [NEXT PAGE] – SAVE AND EXIT
To save the stored data and escape this page, move joystick to the right direction when
cursor is at SAVE AND EXIT.
14. DOME SET – [NEXT PAGE] – EXIT
To escape this page without saving, move joystick to the right direction when cursor is at
EXIT.
INITIALIZATION
[TOUR CLEAR]
[PRESET CLEAR]
[SECTOR CLEAR]
[PRIVACY CLEAR]
[PATTERN CLEAR]
[LOAD OPTIMIZED DEFAULT]
[PREVIOUS PAGE]
TOUR CLEAR
ARE YOU SURE? YES
NO
TOUR CLEAR
LOAD FACTORY
DEFAULT
ARE YOU SURE? YES NOW
EEPROM
CHECKING ALL DATA
INITIALIZING