AAEON AGP-3175 - Manual (Page 31)

R u g g e d E x p a n d a b l e
A G P - 3 1 7 5
T o u c h P a n e l P C
Chapter 2 Hardware Installation 2-15
2.21 Panel Mount Kit Installation
Some screw sets will come with the product for user to mount the
AGP-3175 on the wall. See the steps below along with the
illustration.
Step 1: Bore the screw into the screw nut.
Step 2: Locate the screw set into the hole around the monitor as
the right illustration and pull it back to lock the screw set
on the hole.
Step 3: Turn the screw around to make it tight until it is closed to
the wall.
Step 4: Lock the monitor to the wall with the screw set and finish
the installation