Gorman-Rupp Pumps PAH8A60C-B 1537579 and up - Manual (Page 8)

PAH SERIES OM-06455
PAGE A - 2 SAFETY
when required for startup or shutdown
procedures.
Do not operate the pump without the
guards in place over the rotating parts.
Exposed rotating parts can catch cloth­
ing, fingers, or tools, causing severe in­
jury to personnel.
Do not remove plates, covers, gauges,
pipe plugs, or fittings from an over­
heated pump. Vapor pressure within the
pump can cause parts being disen­
gaged to be ejected with great force. Al­
low the pump to cool completely before
servicing.
This pump may be used to handle mate­
rials which could cause illness through
direct exposure or emitted fumes. Wear
adequate protective clothing when
working on the pump or piping.
Pumps and related equipment must be in­
stalled and operated according to all na­
tional, local and industry standards.