Gorman-Rupp Pumps 16C2-F4L 1319251 and up - Manual (Page 7)

10 SERIES OM-00725
PAGE A - 2 SAFETY
When operating internal combustion
engines in an enclosed area, make cer­
tain that exhaust fumes are piped to the
outside. These fumes contain carbon
monoxide, a deadly gas that is color­
less, tasteless, and odorless.
Fuel used by internal combustion en­
gines presents an extreme explosion
and fire hazard. Make certain that all
fuel lines are securely connected and
free of leaks. Never refuel a hot or run­
ning engine. Avoid overfilling the fuel
tank. Always use the correct type of fuel.
Pumps and related equipment must be in­
stalled and operated according to all na­
tional, local and industry standards.
Never tamper with the governor to gain
more power. The governor establishes
safe operating limits that should not be
exceeded. The maximum continuous
operating speed for this pump is 1900
RPM.
Allow an over‐heated pump to com­
pletely cool before servicing. Do not re­
move plates, covers, gauges, or fittings
from an over‐heated pump. Liquid with­
in the pump can reach boiling tempera­
tures, and vapor pressure within the
pump can cause parts being disen­
gaged to be ejected with great force. Af­
ter the pumpcompletely cools, drain the
liquid from the pump by removing the
casing drain plug. Use caution when re­
moving the plug to prevent injury to per­
sonnel from hot liquid.